![内页图3](https://img.waimaoniu.net/3166/3166-202208191330103499.jpg?x-oss-process=image/resize,m_fill,w_1920,h_384)
6V DC miniature power relay model 914F
2022-09-21 14:51Safety certification of 6V DC miniature power relay model 914F (relevant certification shall be subject to the certification certificate of the third party)
CQC | 10A 250VAC 16A 250VAC |
UL | 20A/16A 250VAC 1/2HP 125VAC Tungsten9.6A 125VAC E-ballast 9.6A 125VAC 2*5A 125/250VAC 2*8A 125/250VAC |
Soldering conditions of 6V DC miniature power relay model 914F
Automatic soldering | 260 ± 5 ° C 3-5 seconds (SEC) |
Solder resistance | 260 ± 5 ° C for 10 seconds and 350 ± 5 ° C for 3 seconds. After being placed in normal temperature and humidity for 2 hours, the structure and characteristics are normal |
Overall dimension of 6V DC miniature power relay model 914F
Remarks: the size of the lead out leg is the size before pre welding. The dimension tolerance of mounting hole is ± 0.10mm.The overall dimension of the product is not marked with dimensional tolerance. When the overall dimension is ≤ 1mm, the tolerance is ± 0.2mm; When the overall dimension is between 1~5mm, the tolerance is ± 0.3mm;
When the overall dimension is >5mm, the tolerance is ± 0.4mm.
Order description of 6V DC miniature power relay model 914F
1) When it is used in a polluted environment (including H2S, SO2, NO2, and other dust pollutants), it is recommended to select plastic products and verify them in actual use;
2) After the relay is installed into the PCB board, the whole board needs to be cleaned. Contact our company in time to confirm the appropriate welding method and product specification;
3) For the application scenarios where capacitive load, lamp load and motor load lamps will produce high surge current at the moment of relay connection, it is recommended to use AgSnO2 material contacts;
4) If customers have any special requirements, they can contact our company to select the corresponding product model according to the characteristics after review