5V DC Subminiature power relay 5A model 932
2022-09-12 11:20Subminiature Power Relay Model 932 parameter information：
Overall dimensions：18.3*10.2*15.6mm
Relay weight:6g
Contact form：1A
Contact load: 20A 277VAC
Coil voltage：3V DC,5V DC,6V DC,9V DC,12V DC,18V DC,24V DC,48V DC
Coil resistance (Ω± 10%):0.2W,0.45W
between contact coilsvoltage: 5000VAC
Between disconnecting contacts voltage: 1000VAC
Coil voltage/ load current of Subminiature Power Relay Model 932
Coil voltage | 5V |
load current | 5A |
Contact parameters of Subminiature Power Relay Model 932
Contact form | 1A |
Contact resistance | 100m Ω (1a 6vdc) |
Contact materials | AgSnO2, AgCdO, Agni alloy |
Contact load | 20a 277VAC |
Maximum switching voltage | 277VAC |
Maximum switching current | 20A |
Maximum switching power | 5540va |
Mechanical durability | 1*107 times |
Electrical durability | 1*105 times (10a 250VAC) |
performance parameter of Subminiature Power Relay Model 932
Insulation resistance | 1000m Ω (500VDC) | |
Dielectric withstand voltage | between contact coils | 5000Vac 50/60hz 1min |
Between disconnecting contacts | 1000VAC 50/60Hz 1min | |
Impact capacity | Stability | 98m/s2 (10g) |
Strength | 980m/s2 (100g) | |
Vibration | 10hz~55hz 1.5mm double amplitude | |
Relative humidity | ≤ 85% (at35 ℃) | |
Ambient temperature | -40 ℃ ~105 ℃ | |
Outlet mode | printed board | |
Weight | About 6g (according to the real object) | |
Packaging method | Sealed, flux proof | |
The listed parameters are the initial values measured under the standard state. If the environmental state changes, the actual parameters will be affected
The standard state is: temperature: 23 ℃ ± 5 ℃, relative humidity: 25%-75%
